Logo IKO - Setting the standard Search-button
  Home

Insulation for flat roofs:    

Download brochure  

 

For flat roofs is available in four different coatings, each with their own specific qualities.

Enertherm PIR ALU Aluminium Faced Rigid Polyisocyanurate Insulation

Enertherm PIR ALU is a CFC-free insulation board with a rigid polyisocyanurate foam core, faced on both sides with a structured aluminium sheet. IKO Enertherm PIR ALU boards offer outstanding insulating properties, with a thermal conductivity of 0.023w/mk. The current requirements for thermal insulation are set out in Building Regulations Approved Documents L1A/L1B and L2A/L2B 2006: Conservation of fuel and power.

IKO Enertherm PIR ALU is designed to be used in combination with mechanically fastened and self-adhesive waterproofing membranes. It is also used as part of certain other cold applied / torch applied hybrid waterproofing systems. The boards are suitable for use, over a suitable vapour control layer, onto supporting substrates such as profiled metal decking, timber panels, screeded concrete, or to upgrade existing sound bitumen roofing systems.

  • Faced on both sides with a tri-ply gas-tight aluminium sheet
  • Totally CFC/HCFC free (Zero Ozone Depletion)
  • Zero Global Warming
  • Excellent insulation value (thermal conductivity 0.023w/mk)
  • Ideal for meeting the increasingly demanding Building regulations and Part L requirements
  • Fire-performance polyisocyanurate foam core
  • Ideal for self-adhesive and mechanically fastened waterproofing membrane systems
  • Lightweight and easy to handle
  • Rot proof, durable and maintenance free
  • Tapered / cut-to-falls boards

Enertherm PIR MG Thermally Efficient Roof Insulation Boards

Enertherm is a totally CFC/HCFC free, rigid polyisocyanurate foam insulation board, faced on both sides with perforated (mineral-coated) glass tissue. The highly efficient closed cell foam core has a low thermal conductivity and easily achieves required U values with a minimum thickness.

Enertherm is suitable for flat roofing use beneath British Standard and polymer modified mastic asphalt, mechanically fixed polymeric/bituminous single ply membranes, and built-up felt roofing systems.

Enertherm: λD = 0.027  - 0.028 W/m.K. For good fire resistance characteristics, for mechanically attached systems and (cold) adhered systems.

  • Fire-performance polyisocyanurate foam core
  • For use with bitumen membranes, mastic asphalt, and polymeric single ply membranes
  • Lightweight and easy to handle
  • High insulation value / low thermal conductivity
  • Rot proof, durable and maintenance free
  • Ideal for meeting the increasingly demanding Part L requirements
  • Wide range of thicknesses available
  • Zero Global Warming Potential
  • Zero Ozone Depletion Potential
  • Coated on both sides with a mineral-coated glass film
  • IKO Enertherm BGF: λD = 0.027  - 0.028 W/m.K. For hot applied roof sealing systems, coated on both sides with a bituminized glass film.

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

Insulation for walls

IKO Enertherm ALU TG - cavity wall insulation

  • Dimensions: 1200 x 600 mm
  • Thickness: 40, 50, 60, 70, 82, 100 and 120 mm
  • Edge finishing: tongue and groove
  • Covering: aluminium multi-layer complex

Exterior Wall Insulation:

IKO Enertherm Wrap

ALU TG - exterior wall insulation 

Insulation for Floors:

IKO Enertherm KR ALU: Floor heating, with KR ALU facer with a grid

IKO Enertherm ALU: Standard with alu facer, aluminium multi layer complex

Insulation for lofts, attics;

IKO Enertherm ALU TG - loft insulation

IKO Enertherm ALU TG - over rafter insulation

 
About IKO Northern Ireland
Technical Services
Contact us
Flat Roofing
Maintainence of Asphalt Driveways
Asphalt Road & Bridge Repair & Exp Joints
Bitumen & Bitumen Paints
Bituminous Corrugated Sheets
Combating Ground Water & Rising Damp
Concrete Additives
Concrete Paving Cleaning & Protection
Flood Defence Systems
Geo Textile Membranes
Photopholtaic Systems
Tools
Insulation
Mastic Asphalt, Paving, Flooring, Tanking
Pitched Roof Systems
Preparation, Priming & Painting of Roofs & Walls
Roofing Accessories
Roofing Shingles
Tiling Adhesives, Grouts & Floor Leveller
Fixings